Type-II AsP/Sc2CO2 van der Waals heterostructure: an excellent photocatalyst for overall water splitting

In this work, we explore the application potential of AsP/M₂CO₂ (M = Sc, Zr) van der Waals heterostructures in photocatalytic water splitting through the first-principles calculations. The calculated results show that AsP/Zr₂CO₂ heterostructure possesses an unfavorable type-Ⅰ band alignment, whereas AsP/Sc₂CO₂ exhibits a desirable type-Ⅱ band alignment, which is beneficial for separating the photogenerated electron-hole pairs. Also, the band edge positions of AsP/Sc₂CO₂ heterostructure stride the redox potential of water, ensuring favorable reaction kinetics. Besides, the strong optical absorption of AsP/Sc₂CO₂ heterostructure in both visible and ultraviolet regions (especially up to 10⁻⁶ cm⁻¹ at about 250 nm) makes it possible to utilize solar energy effectively. Meanwhile, AsP/Sc₂CO₂ heterostructure has an exciton binding energy as low as 0.09 eV, which quantitatively illustrates the high separation efficiency of photogenerated charge carrier. Thus, the type-Ⅱ band alignment, suitable band edge position, strong light absorption, and low exciton binding energy together indicate that AsP/Sc₂CO₂ heterostructure is a potential photocatalytic material. In addition, the obvious redshift phenomenon in the optical spectrum of AsP/Sc₂CO₂ heterostructure shows that biaxial strain can improve its light capture capability. Also, the interconversion between type-Ⅱ and type-Ⅰ can be achieved by applying different strains. All these findings suggest that the novel AsP/Sc₂CO₂ heterostructure has significant application prospects in next-generation photovoltaic and photocatalytic devices.     

Various density light field image coding based on distortion minimization interpolation

In recent years, the light field (LF) as a new imaging modality has attracted wide interest. The large data volume of LF images poses great challenge to LF image coding, and the LF images captured by different devices show significant differences in angular domain. In this paper we propose a view prediction framework to handle LF image coding with various sampling density. All LF images are represented as view arrays. We first partition the views into reference view (RV) set and intermediate view (IV) set. The RVs are rearranged into a pseudo sequence and directly compressed by a video encoder. Other views are then predicted by the RVs. To exploit the four dimensional signal structure, we propose the linear approximation prior (LAP) to reveal the correlation among LF views and efficiently remove the LF data redundancy. Based on the LAP, a distortion minimization interpolation (DMI) method is used to predict IVs. To robustly handle the LF images with different sampling density, we propose an Iteratively Updating depth image based rendering (IU-DIBR) method to extend our DMI. Some auxiliary views are generated to cover the target region and then the DMI calculates reconstruction coefficients for the IVs. Different view partition patterns are also explored. Extensive experiments on different types LF images also valid the efficiency of the proposed method.     

某福利院一起肠炎沙门菌食源性疾病的调查分析

目的 对某福利院一起肠炎沙门菌食源性疾病进行调查和溯源,为研究相关食源性疾病提供参考。方法采用流行病学、食品卫生学和脉冲场凝胶电泳(PFGE)同源性分析等方法,分析本次食源性疾病事件。结果 确认本次事件中病例23名,患病率5.65%(23/407)；现场采集病例肛拭子15份和厨房工作人员肛拭子3份、留样菜品3份、水果2份以及冰棒1份,其中从11份病例肛拭子中检出肠炎沙门菌,PFGE结果显示11株肠炎沙门菌的DNA条带图谱相似性为96.4%,聚类分析为同一型,结合流行病学调查,初步判断菌株来自同一克隆系。结论 综合流行病学、食品卫生学和实验室检测结果,确定为一起肠炎沙门菌引起的食源性疾病,福利院应加强对特殊人群的饮食安全管理,制定相应的食源性疾病突发事件应急处理预案,防止此类事故再发生。     

Flow modeling of high-viscosity fluids in pipeline infrastructure of oil and gas enterprises

Today, the issues related to solving the problem of finding an effective distribution of oil flows through the system of oil pipelines in order to reduce the total energy consumption are relevant. The solution to this problem is connected with selection of rational pumping modes for various technological sections of oil pipelines using modern methods of mathematical programming or new techniques for improving the energy and transport characteristics of oil.Reducing energy consumption during pumping of crude through oil trunk pipelines can be achieved by various methods. Numerous investigations in this direction are mainly carried out to save energy on separate single-line pipelines. However, due to the development of the network of trunk oil pipelines in the world over the past decades, the issues of energy efficient management of oil flows throughout the entire oil pipeline system of oil and gas enterprises become urgent.This paper analyses parameters for pipeline transport of high-viscosity and heavy oils. The article proposes a method for assessing the rheological properties of oil for further planning of pumping taking into account the preservation of oil quality and an increase in energy and transport characteristics. The proposed solutions and tasks for predicting changes in the viscosity-temperature characteristics of the flow for blends of different oil types are especially relevant in the current conditions of an increase in the share of oil production with complex rheological characteristics. Results of the presented investigations may be used for planning the measures of efficient transportation of high-viscosity and heavy oils.     

Digital image correlation for strain measurement in plastic film blowing process

Surface deformation study of a polymer film during plastic film blowing (PFB) extrusion process though is considered essential, is difficult to execute as the process is fast and continuous. Digital image correlation (DIC) is an optical technique that is non-destructive, highly accurate and designed to measure deformations from micro to macro scale. DIC can be proposed as a reliable tool to understand the relationship of polymer structure-processing-properties. In this literature, digital image correlation, its basic principle of operation and reliability guided DIC for continuous large deformation are comprehensively explored. Versatility of DIC, and the conditions that affect the measurement algorithm as well as preceding use of DIC in polymer processes are reviewed. The implementation and potential use of DIC in PFB are described.

This review was submitted as part of the 2019 Materials Literature Review Prize of the Institute of Materials, Minerals and Mining run by the Editorial Board of MST. Sponsorship of the prize by TWI Ltd is gratefully acknowledged.     

Computational modelling of water flow inside laboratory Knelson concentrator bowl

Enhanced gravity concentrators such as Knelson concentrator (KC) are extensively used in the mineral processing industry. The complexities of KC bowl geometry and variation of feed characteristics have forced process engineers to design empirically new units using laboratory and pilot-scale Knelson concentrators. However, numerical modelling methods such as computational fluid dynamics (CFD) and discrete element method (DEM) provide a better insight of flow behaviour of fluid and particulate solid phases inside these processing units. This article reports findings of CFD simulations for single-phase water flow inside the laboratory KC. An available standard 7.5-cm laboratory KC bowl was numerically simulated using realisable k-ε turbulence model to resolve the turbulence dispersion of existing transitional flow regime. The effects of relative centrifugal force (RCF) intensity and bed fluidisation water flow rate on the water velocity and pressure distributions were studied. Simulations confirmed the swirling flow pattern governing inside the bowl. The results revealed that the impact of RCF intensity on the water field values is greater than that of bed fluidisation water flow rate. Both velocity and pressure variations inside the bowl rings followed a linear trend.     

Evaluation of adult and offspring thiamine deficiency in salmonine species from Lake Ontario

Thiamine Deficiency Complex (TDC) is an ongoing problem impacting salmonine health in various waterbodies, including Lake Ontario. The prevalence of TDC has been variable and explanations for differences are limited. In the current study, thiamine concentrations were measured in eggs, liver tissue, and muscle tissue sampled from brown trout (Salmo trutta), Chinook salmon (Oncorhynchus tshawytscha), coho salmon (O. kisutch), lake trout (Salvelinus namaycush), and steelhead trout (O. mykiss) that were collected from Lake Ontario and its surrounding tributaries. The occurrence of TDC was measured for each species based on TDC-induced offspring mortality rates under laboratory conditions. TDC-induced offspring mortality was observed for all species except brown trout. For affected species, egg free thiamine (Th) was consistently low compared to lake trout collected from Lake Superior that are considered thiamine replete. In addition, species with the lowest percentages of Th in their eggs were the most susceptible to TDC, suggesting that limited thiamine reserves in the form of Th may cause TDC-induced offspring mortality. Lastly, our results show that egg thiamine concentrations have yearly variation and increased for all species throughout the study. Reasons for such variation are undetermined; but, if egg thiamine concentrations continue to increase, the impacts of TDC on these salmonine species may lessen. Future monitoring is needed for determining if thiamine concentrations are increasing and the potential impacts that may have on the entire Lake Ontario fishery.     

Impact of urban development on residents’ public transportation travel energy consumption in China: An analysis of hydrogen fuel cell vehicles alternatives

Urban development has an important influence on the energy consumption of transportation. To develop public transportation is one of the important ways to decrease the energy consumption of urban transportation. It is very urgent to upgrade technology to reduce the energy consumption and emissions of the vehicles constantly. The popularization of hydrogen fuel cell vehicles is the trend of the future automobile industry, which can effectively reduce traffic energy consumption and alleviate urban pollution. This article analyzes the impact of urban development on public transport and private transportation energy consumption from 2013 to 2015; and uses hydrogen fuel cell vehicles alternatives in urban public transport as a scenario. It shows that urban economic development can effectively reduce public transport. Population growth will increase greatly energy consumption of public transport, while larger cities with reasonable spatial density can reduce traffic energy consumption. Moreover, hydrogen fuel cell vehicles can effectively reduce the energy consumption and pollution emissions of urban transportation during operating. Based on the above conclusions, this article will eventually provide targeted recommendations for the development of Chinese cities, public transport, and hydrogen fuel cell vehicles.     

Full Eulerian deformable solid-fluid interaction scheme based on building-cube method for large-scale parallel computing

We propose a full Eulerian incompressible solid-fluid interaction scheme capable of achieving high parallel efficiency and easily generating meshes for complex solid geometries. While good scalability of a full Eulerian solid-fluid interaction formulation has been reported by Sugiyama et al, their analysis was carried out using uniform Cartesian mesh and an artificial compressibility method. Typically, it is more challenging to achieve good scalability for hierarchical Cartesian meshes and a fully incompressible formulation. In addition, the conventional full Eulerian methods require a large computational cost to resolve complex solid geometries due to the usage of uniform Cartesian meshes. In an attempt to overcome the aforementioned issues, we employ the building-cube method, where the computational domain is divided into cubic regions called cubes. Each cube is divided at equal intervals, the same number of cubes is assigned to each core, and the spatial loop processing is executed for each cube. The numerical method is verified by computing five numerical examples. In the weak scaling test, the parallel efficiency at 32768 cores with 32 cores as a reference is 93.6%. In the strong scaling test, the parallel efficiency at 32768 cores with 128 cores as a reference is 70.2%.